by an authorized Arctic Cat ATV dealer. Headlight q NOTE The bulb portion of the headlight is fragile. When replacing the head- light bulb, do not touch the glass portion of the bulb. If the glass is touched, it must be cleaned with a dry cloth. To replace the headlight bulb, use the following procedure: Remove the sealing and the re- tainer. Retract the bulb housing from the retainer and remove the bulb. Install the new bulb . Install the bulb housing in rever- se order. !! CAUTION !! When breaking the tire bead loose from the wheel, be extremely care- ful not to damage the inner wheel surface or the tire bead. !! WARNING !!
The use of worn-out tires can be dangerous and can increase the risk of an accident. Front/Rear Wheel Removal Park the ATV on level ground and engage the parking brake. Loosen the lug nuts. Elevate the ATV by placing a jack under the axle. Remove the wheel Install the wheel and install the lug nuts. Tighten the nuts to 65 Nm Remove the jack. Tire Replacement The ATV has low-pressure tubeless tires. Air is sealed by the contact surfaces of the inner wheel rim and the tire bead. If either the inner wheel rim or tire bead is damaged, air may leak. Be extremely careful not to damage these areas when replacing tires.
If proper tools and related items are not available, have this maintenance performed !! CAUTION !! When replacing the headlight bulb, be careful not to touch the glass portion of the bulb. If the glass is touched, it must be cleaned with a dry cloth. Page 46