4-2 SPECIFICATION The batteries are not set up as TOYOTA genuine parts. Use a battery compatible to DIN43 536 (See the battery case di- mensions listed in the table on page 4-4). In case where high height battery type and battery roll out option are selected, the battery case dimensions are different from the STD type. Use a battery attached with the intermediate tapping led. Length X Z Height Y Width NECESSARY BATTERY WEIGHT When installing a battery, refer to the table on page 4-4. adjust the weight so that the necessary minimum weight is satisfied. RECOMMENDED BATTERIES Refer to the table on page 4-4.
BATTERY CONNECTOR RELEASE The battery connector release is the standard equipment in all the models. Since the battery connecter is located under the battery hood, it is necessary to disconnect at the operator’s seat by the lever opera- tion.