CMD Commercial Application Marine Propulsion(B/C/N14) C8.3 Commercial Marine and Ind [...] Page W-20 Section W - Warranty Owner is responsible for the costs to investigate complaints, unless the problem is caused by a defect in CMD material or factory workmanship. Owner is responsible for non-Engine repairs, “downtime” expenses, cargo damage, fines, all applicable taxes, all business costs and other losses resulting from a Warrantable Failure. Limitations CMD is not responsible for failures or damage resulting from what CMD determines to be abuse or neglect, including, but not limited to:
operation without adequate coolants or lubricants; overfueling; overspeeding; lack of maintenance of cooling, lubricating or intake systems; improper storage, starting, warm-up, run-in or shutdown practices; unauthorized modifications to the Engine. CMD is also not responsible for failures caused by incorrect oil or fuel, or by water, dirt or other contaminants in the fuel or oil. CMD is not responsible for failure resulting from: 1 Use or application of the Product inconsistent with its rating designation set forth above. 2 Incorrect installation.
Before a claim for excessive oil consumption will be considered, Owner must submit adequate documentation to show that oil consumption exceeds CMD published standards. CMD is not responsible for failures of maintenance components supplied by CMD beyond 90 days after the Coverage duration start date. Maintenance components include, but are not limited to: sea water pump impellers; zinc plugs; oil filters; fuel filters; air filters; water filters; fuel/water separator filters; expansion tank pressure caps.
Failure of belts and hoses supplied by CMD are not covered beyond 90 days after the date of delivery of the Product to the first user, or the date the unit is first leased, rented or loaned, or when the Product has been operated for 50 hours, whichever occurs first. Except for the accessories noted previously, CMD does not warrant accessories which bear the name of another company.