OPERATION ADJUST THE SEAT BELT Always install a seat belt on machines equipped with ROPS. WARNING Before fitting the seat belt, check that there is no abnormality in the mounting bracket and belt mounting. If the belt is worn or damaged, replace it. Always fasten the seat belt before starting operations. Do not twist the left or right side of the seat belt when fastening it. Fastening and removing the belt 1. Sit on the seat. Depress the brake pedal fully, and adjust the seat so that your back is pressed against the backrest. 2. While still on the seat, pull the tongue end of the seat belt from the retractor (1). Insert the tongue (4) into the buckle (3).
Pull the belt to check that it is securely locked. 3. To remove the belt, depress the release button on the buckle (3) and guide the tongue end of the belt into the retractor (1). ADJUST THE REAR VIEW MIRROR Sit in the operator’s seat and adjust the rear view mirror so that you have an unobstructed view to the rear. WA450-3MC 2-47