OPERATION 12.11.4 PRECAUTIONS WHEN DRIVING THE MACHINE When the machine travels at high speed for a long distance, the tires become extremely hot. This situation causes premature tire wear. Thus, avoid high-speed, long-distance trips. If the machine must be driven for a long distance, take the following precautions. Follow the regulations relating to this machine, and drive carefully. Before driving the machine, perform the checks before starting. The most suitable tire pressure, travel speed, or tire type differ according to the condition of the travel surface. Contact your distributor or tire dealer for information.
The following is a guide to suitable tire pressures and speeds when traveling on a paved surface with standard tires. Tire pressure (front and rear ): (3.5 kg/cmІ, 49.7 psi) Speed: 14 km/h (8.7 mph) Check the tire pressure before starting the trip, when the tires are cool. After traveling for 1 hour, stop for 30 minutes. Check the tires and other parts for damage; also check the oil and coolant levels. Always travel with the bucket empty. Never put dry ballast in the tires when traveling. WA450-3MC 2-69