OPERATION STARTING THE ENGINE 1. Make sure the clips are firmly connected to the battery terminals. 2. Start the engine of the normal machine and run it at high idle speed. 3. Turn the starting switch of the problem machine to the START position and start the engine. If the engine doesn't start at first, try again after 2 minutes or so. DISCONNECTING THE BOOSTER CABLE After the engine has started, disconnect the booster cables in the reverse order in which they were connected. 1. Remove one clip of the booster cable (B) from the engine block of the problem machine. 2. Remove the other clip of the booster cable (B) from the negative (-) terminal of the normal machine. 3.
Remove one clip of the booster cable (A) from the positive (+) terminal of the normal machine. 4. Remove the other clip of the booster cable (A) from the positive (+) terminal of the problem machine. WA450-3MC 2-92