MAINTENANCE 20. FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE 20.1 PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS It is not our policy to approve of fuel, coolant, and lubricants or to guarantee performance in service. The quality of the fuel, coolant and lubricant is the responsibility of the supplier. When in doubt, consult your distributor. The specified fuel, coolant, and lubricants recommended for this machine are shown in the following table. SPECIFIED CAPACITY: Total amount of oil, including the oil for the components and oil in the piping. REFILL CAPACITY: Amount of oil needed to refill the system during normal inspection and maintenance.
WA450-3MC 3-9 RESERVOIR FLUID TYPE AMBIENT TEMPERATURE CAPACITY -22 -4 14 32 50 68 86 104 -30 -20 -10 0 10 20 30 40 Specified Refill Engine oil pan Engine oil 47 12.4 gal 38 10 gal SA E 30 S AE 10 W SAE 1 0W-30 SA E 15W -40 Transmission case Engine oil 65 17.16 gal 60 15.8 gal Hydraulic system SAE 10W 280 73.9 gal 192 50.7 gal Front axle Axle oil See 20.4 DRIVE AXLE OIL SPECIFICATIONS on page 3-11. 65 17.2 gal 65 17.2 gal Rear axle Pins Grease --- --- N LGI No . 2 Fuel tank Diesel fuel 390 102.96 gal - - ASTM D975 No. 2 ASTM N D975 o. 1 Cooling system Coolant See 20.6 COOLANT SPECIFICATIONS on page 3-12. 68 18 gal - -