MAINTENANCE 24.2.12 DRAIN WATER FROM WATER SEPARATOR (if equipped) When the float (2) is at or above the red line (1), drain the water according to the following procedure. 1. Loosen the drain plug (3) and the air bleed plug (4) (if equipped). Drain the accumulated water until the float reaches the bottom. 2. Tighten the air bleed plug (4) and the drain plug (3). 24.2.13 SELECTION AND INSPECTION OF TIRES WARNING If a tire or a rim is handled incorrectly, the tire may burst or may be damaged and the rim may be broken and scattered, and that can cause serious injury and death.
Since maintenance, disassembly, repair, and assembly of the tires and rims require special equipment and skill, be sure to ask a tire repair shop to perform the work. Do not heat or weld the rim to which the tire is installed. Do not make a fire near the tire. Select the tires according to the conditions of use and attachments on the machine. Use only the specified tires and inflate them to the specified pressure. Selection of Tires Select the tires according to the conditions of use and attachments of the machine. Because the indicated speed varies with the tire size, consult your distributor when using optional tires. WA450-3MC 3-36