MAINTENANCE 24.8.4 CHECK TIGHTENING PARTS OF TURBOCHARGER Contact your distributor to have the tightening points checked. 24.8.5 CHECK PLAY OF TURBOCHARGER ROTOR Ask your distributor to check the turbocharger rotor play. 24.8.6 REPLACE CORROSION RESISTOR CARTRIDGE 1. Screw in the valve (1) at the side of the corrosion resistor. 2. Using the filter wrench provided, turn the cartridge (2) counterclockwise. 3. Coat the new cartridge’s seal with engine oil. 4. After installing the cartridge to the filter holder, turn the cartridge an additional two-thirds turn after the seal contacts the filter holder’s surface. 5. Open the valve (1). 6.
After replacing the cartridge, check that no water leakage exists from the filter surface area. WA450-3MC 3-54