OPTIONS, ATTACHMENTS 30.2 RADIO 30.2.1 OPERATION 1. LIQUID CRYSTAL DISPLAY (LCD) PANEL The LCD panel is the primary information display: radio frequency, time, audio settings, and cassette operation (if used). 2. ON-OFF POWER BUTTON Press this button to turn off the power for the radio and cassette player. Press this button again to turn on the power. 3. AUDIO MODE SELECTOR BUTTON After selecting the desired audio function, the LCD will display the selected function: VOL (volume), BAS (bass), TRE (treble), FAD (fader). FAD will be displayed only if the four speakers connect to the system. Once the audio mode is selected, use the (+) button (4) or the (-) button (5) to adjust the level.
Volume After VOL appears on the LCD, hold the (+) to increase the volume or the (-) button decrease the volume. A bar graph on the LCD indicates the progress. The bar graph has a maximum of 13 squares: Bass After BAS appears on the LCD, press the (+) or (-) button within five seconds to obtain the desired emphasis of the low range tones. A triangle ( splay panel to indicate the level. The unit will retain this setting when turned off. Treble After TRE appears on the LCD, press the (+) or (-) button within five seconds to obtain the desired emphasis of the high range tones. A triangle ( e the level. The unit will retain this setting when turned off.
Balance After BAL appears on the LCD, press the (+) button within five seconds to emphasize the right speaker volume and the (-) button to emphasize the left speaker volume. The center illuminated arrow indicates mid-balance position. 4, 5. AUDIO LEVEL BUTTONS (+) (-) After obtaining the desired mode (3) to adjust, use these buttons to make the adjustments. WA450-3MC 5-12