WARNING: For reasons of safety, always follow these safety precautions. SAFETY Clean the machine before inspection and maintenance so that Procedures can be carried out safely without entry by dirt into the machine. Problem areas are less likely to be obscured by mud and debris. Chances of personal injury from falls or flying debris are lessened. When washing the machine Wear non-slip shoes to maintain your footing on wet surfaces. Wear protective clothing, especially when cleaning with steam or high pressure water. Steam can cause burns. Water under pressure can cause injury. Do not spray water directly on the electrical system (sensors, connectors, etc.)(1).
Water in the electrical system may cause defective operation and malfunctions. Do not leave hammers or other tools lying around in the work place. Wipe up all grease, oil and other substances. Always keep the work place clean and tidy to allow safe operations, minimize tripping, slipping and falls. APPOINT LEADER WHEN WORKING IN GROUPS When repairing the machine or when removing and installing work equipment, appoint a leader to coordinate activities. Misunderstandings between workers can cause accidents. WA450-3MC 1-24 CLEAN BEFORE INSPECTION AND MAINTENANCE KEEP WORK PLACE CLEAN AND TIDY