36 Adjustment of the Dozer Width For changing from standard width to narrow width: 1. Pull out the fi xing pin (2) and remove the extension dozer (1). 2. Set as under illustration the extension dozer (1), insert fi xing pin (2). 3. It is the same operations for opposite side (left or right), and also for changing from standard width to wide width. Operation of the Dozer NOTE: While operating the dozer, the track width change / dozer select lever must be set position (A). (1) Track width change / (A) “Dozer” dozer select lever 1. To raise the dozer, pull back the control lever. Pushing the control lever forwards, lowers the dozer.
(1) Extension dozer (2) Fixing pin (1) Control lever (A) “Lower” (B) “Raise” 2. While undertaking earth moving work, control both drive levers with the left hand and the control lever with the right hand.