FUEL, COOLANT AND LUBRICANTS LUBRICATION WITH GREASE LUBRICATION POINTS CONSISTENCY TYPE Articulations, cardan joints NLGI 2 Litio EP + MoS 2 149 IMPORTANT • When the diesel oil sulphur content is less than 0,5%, change the engine oil according to the periodic maintenance intervals indicated in the operation and maintenance manual. If the diesel oil sulphur con- tent exceeds 0,5%, change the engine oil according to the following table:
Sulphur content Engine oil change intervale from 0.5 a 1.0% 1/2 of regular interval over 1.0% 1/4 of regular interval • When starting the engine at temperatures below 0°C, use engine oil SAE 10W, 20W-20, even if during the day the temperature increases by 10°C. • Use engine oil with CD classification; if oil with CC classification is used, reduce the engine oil change interval by a half. • Use Komatsu Utility genuine products whose characteristics have been specifically formulated and approved for use in the engine, in the work equipment hydraulic circuit, in the transmission and in the axles and brakes. First filling quantity:
total quantity of oil, including the oil for the components and pipes. Oil change quantity: quantity of oil necessary to fill the system or unit during the normal inspection and mainte- nance operations. ASTM: American Society of Testing and Materials SAE: Society of Automotive Engineers API: American Petroleum Institute UTTO: Universal Tractor Transmission Oil