PRECAUTIONS TO BE TAKEN WHEN WORKING 2.4.11 PARKING THE MACHINE RWA00370 Park the machine on firm and level ground. If this is not possi- ble and it is necessary to park on a slope, position the ma- chine with the front bucket directed downwards and carry out the following operations: 1 - While keeping the machine stopped with the brakes, apply the parking brake. 2 - Dump the front bucket to the unloading position and lower the arms until the teeth are driven into the ground. 3 - Carry out the same operations with the backhoe bucket. 4 - Stop the engine. 5 - Put wedges or safety blocks under the front and rear wheels.
Always rest the work equipment on the ground; if it is neces- sary to park with raised arms, make sure that the safety locks are engaged. RWA00380 Always engage the control lever safety locks. When leaving the machine, apply the parking brake, make sure that the cab windows are closed, remove the ignition key and finally lock the doors. If it is necessary to park on public roads, provide for signalling the presence of the machine according to the local regulations in force (signalling fires, fences, road works ahead, alternated direction and direction signs, etc.). RWA31250 RWA35030 RWA34810 40