INSTRUMENTS AND CONTROLS 9 - DIRECTION SELECTOR, DIMMER SWITCH, HORN, BLINKING A RWA02600 9 A - Turn to the left B - Turn to the right C - Horn D - Light switching E - Blinking. E C B D 64 10 - FOUR-WHEEL DRIVE PUSH BUTTON This push button is positioned on the gearshift control and, when pressed, engages the 4WD, which is also signalled by the com- ing on of the relevant green led. In this position also the warning light (3) positioned on the dash- board comes on. When the push button is pressed again (led off), the four-wheel drive is disengaged and the normal drive is automatically re- stored. For further details, see “3.3.5 pos. 1 REVERSING GEAR-GEAR- SHIFT CONTROL”).
IMPORTANT • When travelling at high speed and on roads, disengage the four-wheel drive. 10 This push button is positioned on the gearshift control and, when pressed, engages the 4WD, which is also signalled by the com- ing on of the relevant green led. In this position also the warning light (3) positioned on the dash- board comes on. When the push button is pressed again (led off), the four-wheel drive is disengaged and the normal drive is automatically re- stored. For further details, see “3.3.5 pos. 1 REVERSING GEAR-GEAR- SHIFT CONTROL”). -+ 10 IMPORTANT • When travelling at high speed and on roads, disengage the four-wheel drive. RWA16680 RWA16680