INSTRUMENTS AND CONTROLS 8 - ENGINE COOLANT TEMPERATURE WARN- ING LIGHT OPT OPT OPT This warning light comes on, together with the acoustic alarm, when the engine coolant exceeds the maximum temperature al- lowed; in this case, let the engine idle (approx. 1200 rpm) until it stops. If this inconvenience occurs again, make sure that the radiator is clean. 8 9 9 9 9 - AVAILABLE FOR OPTIONAL EQUIPMENT WARNING LIGHTS 9 8 9 9 10 15 20 25 30 RPM x 100 electronic RWA02660 10 - ACOUSTIC ALARM This alarm starts when the circuits are energized by means of the ignition switch (by turning it to position “ I ”) and is automati- cally disconnected when the engine starts.
The sounding of the alarm when the machine is working signals the following anomalies: • Insufficient engine oil pressure • Overheating of the engine cooling circuit • Overheating of the transmission oil • Faulty alternator or worn belt roads and after connecting the light to the outlet (See “3.3.4 pos. 2”). 68 10 RWA02720 11 - REAR WORKING LIGHT SWITCH This switch enables the rear working light circuit. IMPORTANT • When travelling on roads, turn off the working lights. 13 12 11 This switch enables the rear working light circuit. IMPORTANT • When travelling on roads, turn off the working lights. 15 10 20 5 25 RPM x 100 30 electronic 13 12 11 RWA02670