INSTRUMENTS AND CONTROLS 3.3.3 PUSH BUTTONS ON THE FRONT LOADER CONTROL LEVER A A 3 1 1 - Declutch push button 2 - Differential locking push button 3 - 4in1 bucket opening push button 4 4 - 4in1 bucket folding push button 2 5 6 5 - Front loader speed control push button 6 - Kick-down push button RWA31280 1 - DECLUTCH PUSH BUTTON This push button is used to transform all the engine power into hydraulic power for the lifting of materials. (See “3.3.5 pos. 10 DECLUTCH CONTROL”). 1 2 3 4 2 - DIFFERENTIAL LOCKING PUSH BUTTON This push button must be used with low gears and reduced speed only when it is necessary to make the rear driving wheels integral with each other in case of slipping.
(See "3.3.5 pos. 11 DIFFERENTIAL LOCKING PUSH BUT- TON"). 3 1 4 2 3 - 4IN1 BUCKET OPENING PUSH BUTTON Press the push button to open the bucket; when the push button is released, the bucket stops. (See “3.3.5 pos. 12 4IN1 BUCKET OPENING CONTROL”). RWA31290 4 - 4IN1 BUCKET FOLDING PUSH BUTTON Press the push button to fold the bucket; when the push button is released, the bucket stops. (See “3.3.5 pos. 13 4IN1 BUCKET FOLDING CONTROL”). L 5 - FRONT LOADER SPEED CONTROL PUSH BUTTON 5 6 The front loader movement speed can be increased by means of this push button. A A 6 - KICK-DOWN PUSH BUTTON 6 5 This is a pulse push button connected with the electronically- controlled gearshift.
It selects the 1 st gear from the 2 nd gear or vice versa and keeps them engaged. (See “3.3.5 pos. 5 KICK-DOWN PUSH BUT- TON”). RWA31300 71