INSTRUMENTS AND CONTROLS KICK-DOWN FUNCTION FOR 1 st AND 2 nd GEAR ONLY A A A pulse push button (1) positioned on the front loader control lever and connected to the electronic control system engages the 1 st gear from the 2 nd or the 2 nd from the 1 st and maintains the selected gear. With the semiautomatic logic (SA), it is possible to shift from 1 st to 2 nd gear and from 2 nd to 1 st gear. With the automatic logic (AU) it is only possible to shift from 2 nd to 1 st gear. 1 If the KICK DOWN function is selected - 1 st from 2 nd gear - the electronic control system verifies the optimal rpm for the shift- ing (programmable).
When the rpm is not optimal, the flashing led (13) comes on and a long beep (1 sec) is emitted. When the optimal rpm has been reached, the led goes out and the 1 st gear is engaged. RWA12530 13 If the KICK DOWN function is selected - 2 nd from 1 st gear - the engagement of the 2 nd gear takes place immediately The functions of the UP/DOWN button have priority over the functions of the KICK DOWN button. The electronic control system acquires a differentiated selec- tion if between two selections a mininum time of 0.5 seconds elapses (the selections are not simultaneous).
+ - RWA12480 80 2 • A state button (2) positioned on the front loader control lever and connected to the electronic control system disconnects the transmission for the 1st and 2nd gear only. The DECLUTCH function remains in operation as long as the state button remains pressed. RWA31310 RWA31310 IMPORTANT • If the drive is re-connected with speed increasing the opti- mal rpm, the flashing led (13) comes on, a long beep (1 sec) is emitted and the electronic control system engages the 3rd gear with semiautomatic logic. 13 +- RWA12480