SAFETY GENERAL PRECAUTIONS HANDRAILS AND STEPS To prevent personal injury caused by slipping or falling off the machine, always do as follows. q Use the handrails and steps marked by arrows (A) in the diagram when getting on or off the machine. q The handrail marked by arrow (B) in the diagram is provided to support yourself when refilling the fuel tank with the fuel. Do not use it for getting on or off the machine. For power angle, power tiltdozer For power tiltdozer q To ensure safety, always face the machine and maintain three-point contact (both feet and one hand, or both hands and one foot) with the handrails and steps (including the track shoe) to ensure that you support yourself.
q Do not grip the control levers, work equipment lock lever, or parking brake lever when getting on or off the machine. q Never climb on the engine hood or covers where there are no non-slip pads. q Before getting on or off the machine, check the handrails and steps (including the track shoe). If there is any oil, grease, or mud on the handrails or steps (including the track shoe), wipe it off immediately. Always keep these parts clean. Repair any damage and tighten any loose bolts. q Do not get on or off the machine while holding tools in your hand. MOUNTING AND DISMOUNTING q Never jump on or off the machine. Never get on or off a moving machine.
q If the machine starts to move when there is no operator on the machine, do not jump on to the machine and try to stop it. 2-11