Operation - Section 32 OM3223 Page 32-6 Operator Cab and Controls CENTER CONSOLE The center console contains: 1. Data Storage Button 2. Trolley Master Control Lever 3. F-N-R Selector 4. Hoist Control Lever 5. Retarder Speed Control Dial 6. RSC ON / OFF Switch 7. Override Switch 8. Engine Shutdown Switch 9. Window Control Switches 10. Cigarette Lighter 11. Passenger Seat (mounted on top of the right hand portion of the console structure) 12. Engine Diagnostics 13. Engine Diagnostics Port (CENSE) 14. Statex III Download Port FIGURE 32-7.
CENTER CONSOLE Data Storage Button F-N-R Selector Switch Data storage button (1, Figure 32-7) is for use by qualified maintenance personnel to record in memory a “snap-shot” of the Statex III drive system. Selector switch (3, Figure 32-7) is mounted on a con- sole to the right of the operator's seat. It is a three position switch which controls the forward-neutral- reverse motion of the truck. When the selector switch handle is in the N position, it is in NEUTRAL. The handle must be in NEUTRAL to start the engine. Trolley Master Control Lever Trolley master switch (2) is mounted on the console to the right of the operator’s seat.
It is a four position switch that controls the speed and use of trolley assistance. For more information regarding the trol- ley master control lever, refer to trolley operating instructions. The operator can select Forward drive by moving the handle forward. Reverse drive can be selected by moving the handle to the rear. The truck is to be stopped before the selector handle is moved to a drive posi- tion.