Replica 1 TE Users Manual Figure 8: ASCII keyboard port Now you are ready to test your replica 1 TE. Make sure your TV or monitor is turned on and flip the switch on the replica 1 up. The red LED next to the switch should light up and a solid block cursor should appear in the upper left corner. If you do not see the cursor at the top of the screen, or the LED is not lit, turn the replica 1 off and recheck your work. Press RESET on the board and your replica will respond with a backslash “ \ ” and the cursor will drop to the next line. The cursor is a blinking ‘ @ ’ symbol just like the original Apple 1 computer. You are now in the Woz monitor and ready to use your replica 1 TE.
If you are using the PS/2 style keyboard you will notice that the caps lock is already on by default for you. The apple 1 only understands uppercase characters so does the replica 1. © Briel Computers 2007 page 12