Argo Service Manual Electrical System Photo 10 iv. Install the headlamp bulb into the lens aligning the bulb assembly with the lens socket. Push in and turn 1/4 turn clockwise. Installing the Headlamp Lens Assembly Models From Serial Number 28922 (Plastic Bezel) i. Reconnect the headlamp bulb into the lens aligning the bulb assembly with the lens socket. Push in and turn 1/4 turn clockwise. ii. Place the lens back to the headlamp opening and secure with the plastic bezel and (4) machine screws.
Photos 11 & 12 (models manufactured from serial number 30030 have a #10 speed nut installed to the back of the screw) NOTE If you have an earlier manuafactured vehicle that does NOT have the #10 speed nuts as- sembled to the screws, it would benefit to have them installed. This will provide a much tighter fit of the plastic bezel to the upper body. Photo 11 Photo 12 Ontario Drive & Gear Limited www.argoutv.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-11