Electrical System Service Manual 30. Install the headlamp lens and place the rubber seal around the perimeter. Photo 38 28. Secure the bulb as in Photo 36 31. Install the bezel to secure the lens in place with the 3 screws previously re- moved in step 2. Photo 39 29. Plug the headlamp wire harness into the bulb. Photo 37 32. At the front of the vehicle remove the hardware illustrated in Photo 40 Ontario Drive & Gear Limited www.odg.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-26