About the Product Product and Component Identification Product and Component Identification Machine Your machine has an identification plate mounted as shown. The product identification number (PIN), weight, engine power, year of manufacture and serial number of the machine are shown on the plate. Figure 4. A A Identification plate The machine model and build specification are indicated by the PIN. The PIN has 17 digits and must be read from left to right. For example, JCB08025L01226500. Table 1. Explanation of the PIN Engine The engine data label is located on the cylinder block as shown. Figure 5. A A Engine data label The data label includes the engine identification number.
The engine identification number has 15 digits and must be read from left to right. For example, GJU65692500405P. 10 9821/6100-4 10 Digit Description 1 to 3 World manufacturer identification. For example, JCB = UK Build. 4 to 8 Machine type and model. For example, 08025 = 8025. 9 Random check Letter. The check letter is used to verify the authenticity of a machine's PIN. 10 to 17 Machine serial number.