7. PRECAUTIONS DURING OPERATION A g&Ftt;;zeE;ereasons of safety, always ty precautrons. Do not leave tools or machine parts around the operator’s compartment. They may damage the control levers or switches and may even cause accidents. Always use the tool box inside the engine compartment (left side). Tool box + See “11.13 TOOL BOX”. Keep the cab floor, controls, @steps and handholds free of oil, grease, snow, and excess dirt. Check the seat belt, buckle and hardware for damage or wear. Replace any worn or damaged parts. Always use seat belts when operating your machine. Seat belts + See “27. USING SEAT BELT”.
I I 1 VENTILATION FOR ENCLOSED AREAS 1 l If it is necessary to start the engine within an enclosed area, provide adequate ventilation. Exhaust fumes from the engine can KILL. L A0055060 1 PRECAUTIONS FOR MIRRORS, WINDOWS AND UGHTS 1 l Remove all dirt from the surface of the windows and lights to ensure that you can see well. l Adjust the rear view mirror so that you can see clearly from the operator’s seat, and always keep the surface of the mirror clean. If any glass is broken, replace it with a new part. l Check that the head lamps and rear lamps are installed to match the operating conditions. Check also that they light up properly.
J 4 PRECAUTIONS FOR SLIDING GLASS INTERMEDIATE LOCK 1 The sliding glass intermediate lock is to prevent rattling of the glass. Even when the lock is used, the glass may move because of the shock when starting or stopping suddenly. Do not put your head or hands out of the window during operations. I-10