POWER STEERING 3B1-7 Power Steering Unit N3A0447E Legend A. NHR, NKR 4. Universal joint B. NPR, NQR, NPS 5. Unit fixing nut and bolt 1. Cotter pin 6. Power steering unit 2. Nut 7. Nut 3. Drag link 8. Pitman arm Removal 4. Remove the oil pipe. Before disconnecting the oil pipe, clean the steer- ing unit paying particular attention to the area around the joint and plug or tape the oil port after disconnecting the pipe to prevent entry of dust or other foreign matter. 1. Remove the head light assembly. (for Non-Tilt Cab Model, driver side only) Refer to “Headlight Re- placement”. 2. Remove the under panel. (for Non-Tilt Cab Model) 3. Remove the front bumper assembly. (for Non-Tilt Cab Model)