CEBIS | Multifunction control lever | CMOTION Comprehensive information. NEW: Automatic machine setup. CEBIS is simple to use, allowing a wealth of equipment Factory-programmed settings for over 35 crop types are information to be displayed and printed in addition to performing full control and monitoring. available. In addition, users' own settings based on experience (especially relating to specific varieties) can be stored and called up whenever required. Furthermore, −Automatic crop setting favourite settings can be stored and recalled quickly by means −GPS PILOT, LASER PILOT, AUTO PILOT – automatic guidance of the hotkey rotary switch. The following machine parameters are set:
−Automated cutterbar control −QUANTIMETER – yield determination / moisture measurement −Threshing drum speed −Concave gap −Area counter −Fan speed −Fuel consumption measurement −Upper and lower sieve opening −Yield mapping – crop log −Performance display – remaining diesel running time / −Sieve throughput monitoring sensitivity −Residual grain separation throughput monitoring sensitivity range / grain tank fill level −Specific crop weight (bulk density) −Job management −Maintenance interval display and tasks −Crop-specific calibration factor −On-board diagnostics, alarm lists and alarm history −Speed monitoring, slippage display (for the threshing drum, for example) 15