Cutterbar Central locking system. A single lever on the left side of the cutterbar operates all locks simultaneously. −Safe, fast locking mechanism −Fast, easy cutterbar attachment and removal Replacement knife bar and crop lifters. All CLAAS cutterbars are factory-equipped with a replacement knife bar. The knife sections are made of hardened material and are therefore extremely durable. The use of crop lifters enables loss-free pickup of laid crops in particular while reducing the intake of stones. Crop lifter replacements can be carried conveniently on the rear side The trailer for road transport. of the cutterbar. Everything to save you time:
The trailer provides compact, convenient and safe storage for the cutterbar. It is locked in Hydrostatic reel drive. seconds with two bolts. A variable displacement pump on the basic machine supplies Made-to-measure compartments are provided to transport a maximum torque of 1000 Nm at the reel. The reel speed is the accessories you need for the rapeseed equipment. The automatically adjusted independently of the ground speed. rubber-coated floor ensures non-slip, protective, theft-proof −Plenty of pulling power thanks to high torque storage.
−Greater efficiency than gear pumps −A closed hydraulic circuit ensures better reel rotation −Fast adjustment of the reel speed Adjustable stripper rails. The spacing between the stripper rails and the intake auger can be conveniently set externally on the V 930, V 770, CERIO 930, CERIO 770, C 490, C 430 and C 370 cutterbars. Hydraulic reversing on the feeder housing Adjusting the stripper rails 25