VARIO 930 / 770 | CERIO cutterbars Ready for rapeseed harvesting with just a few adjustments. NEW: CERIO 930 and CERIO 770. Based on the new VARIO cutterbars, the CERIO model series Converting the is an alternative for grain harvesting. The table of the CERIO V 930 and V 770 cutterbars to harvest rapeseed takes only a matter of minutes. The process involves nothing more than cutterbars can be adjusted manually from – 10 to + 10 cm in order to optimise the crop flow. The adjustment is made by replacing the dividers with the rapeseed knives – a task which loosening ten bolts in order to allow the table to slide in or out.
can be carried out without the need for tools thanks to the two quick-release mounts. Inserting the rapeseed knives automatically activates the hydraulic pump which drives the The entire frame, the intake auger, the drives and the reel of the CERIO cutterbars are identical to those of the VARIO side knives. The connection is made simply by means of two model series. Similarly, the CERIO cutterbars are equipped flat-seal connectors. An additional cover is fitted on the right- hand side to keep the losses in rapeseed to a minimum. with the automatic reel parking function. The end positions of the table and reel are also transmitted automatically from the cutterbar to the combine.
Even with the rapeseed equipment fitted, the table can be extended or retracted by 20 cm. The rapeseed knives are carried in a box on the transport trailer and are therefore available for use at any time. The dividers and rapeseed knives can be secured without the need for tools Fitting the rapeseed knives Adjusting the table length of the CERIO 930 and 770 29