TM1858 (30JUN04) 9015-05-5 700H Crawler Dozer 063004 PN=135 System Information 1—Harness Connector Pin 3—Component Identification 6—Component Connector 9—Component Identification Letter or Number Number 7—Component Connector Pin Number Wire is Routed TO 2—Harness Connector Number 4—Wire Color or Number Letter or Number 10—Wire Color or Number Identification 5—Component Identification 8—Wiring Harness Number Wire is Routed TO Wiring Diagram—If Provided identified by color or number (10). Component identification number (9) indicates destination of each Each harness on the machine is drawn showing wire. components, connectors, and wires.
Harnesses are identified by a “W” component identification number Component Location Diagram and description (W6 ENGINE HARNESS, Etc.). The Component Location Diagram is a pictorial view Each component is represented by a schematic by harness showing location of all electrical symbol and is identified by a component identification components, connectors, harness main ground number and name (3). Components with integral locations and harness band and clamp location. Each connectors (6) have pin number/letters indicated (7).
component will be identified by the same identification Wires from harness to components are identified by letter/number and description used in the System color or number designation (4). Component Functional Schematic Diagram. identification number (5) indicates the component a wire is routed TO. Connector End View Diagram—If Provided Main harness connectors (2) are identified by a “X” The Connector End View Diagram is a pictorial end component identification number and description (X28 view of the component connectors showing the CAB TO ENGINE BULKHEAD CONNECTOR, Etc.).
number of pins in the connector and the wire color and Harness connector description indicates which identifier of the wire in every connector. Each harnesses connect together. Connector pin letters or component will be identified by the same identification numbers (1) are indicated as they are marked on the letter/number and description used in the System connector. Wires attached to each connector pin are Functional Schematic Diagram. Continued on next page CED,TX17984,455 –19–07MAY01–4/6 9015 05 5