System Diagrams F2—5A Spare Fuse F22—10A Spare Fuse K3—Horn Relay F14—10A Spare Fuse F3—10A Start Aid Fuse F13—15A Spare Fuse Auxiliary K7—Transmission Controller F6—7.5A Monitor/Gauge Fuse K5—A/C Relay Light/CB Monitor Relay F18—5A Radio Fuse K4—Heater Blower Relay F10—5A A/C Compressor Fuse F17—5A Dome Light, Radio (Unswitched) F1—5A Start Fuse F15—15A Rops (Under Seat) Fuse (Switched) F20—10A Engine controller F9—10A A/C Condenser Fan Heater Fuse F11—10A Front/Rear Wiper (ECU) (Switched) Fuse F16—10A Standard Lights Washer Fuse K2—Accessory Relay #1 F5—5A Transmission F7—10A AC/Heater Blower F12—15A Left/Right Wiper F21—10A Engine controller Controller Fuse Fuse Washer Fuse (ECU) (Unswitched) F23—10A Spare Fuse F4—5A Horn Fuse F19—5A Service Expert Fuse Located By ECU F8—10A A/C Condenser Fan K6—ACC Relay Fuse IMPORTANT:
Install fuse with correct amperage rating to prevent electrical system damage from overload. The fuse block is located on right side of machine through access cover. 9015 10 9 CED,TX14826,12199 –19–26FEB03–6/6 TM1858 (30JUN04) 9015-10-9 700H Crawler Dozer 063004 PN=147