Safety HANDLE CHEMICAL PRODUCTS SAFELY Direct exposure to chemical products can cause severe skin irritation and injury. Hazardous fumes can be generated when handling the chemicals. TS272 -UN-23AUG88 Wear close fitting clothing and a face mask when handling chemicals. Dispose of chemical waste and packaging material properly. A Material Safety Data Sheet provides specific details on chemical products and physical dangers, safety procedures, and emergency response techniques. User awareness and training is required under U.S. workplace and environmental laws. See your John Deere dealer for information on chemical products used with John Deere equipment.
TM1475 (23OCT95) 10-05-3 F510/F525 Front Mowers DX,MSDS -19-28SEP90 131295 PN=8 PREVENT ACID BURNS Sulfuric acid in battery electrolyte is poisonous. It is strong enough to burn skin, eat holes in clothing, and cause blindness if splashed into eyes. Avoid the hazard by: 1. Filling batteries in a well-ventilated area. 2. Wearing eye protection and rubber gloves. 3. Avoiding breathing fumes when electrolyte is added. 4. Avoiding spilling or dripping electrolyte. 5. Use proper jump start procedure. If you spill acid on yourself: 1. Flush your skin with water. 2. Apply baking soda or lime to help neutralize the acid. 3. Flush your eyes with water for 15—30 minutes.
Get medical attention immediately. If acid is swallowed: -UN-23AUG88 1. Do not induce vomiting. 2. Drink large amounts of water or milk, but do not exceed 2 L (2 quarts). 3. Get medical attention immediately. TS203 DX,POISON -19-21APR93 10 05 3