PRECAUTIONS FOR OPERATION SAFETY G When traveling on snow-covered slopes, never apply the brakes suddenly. Reduce the speed and use the engine as a brake while appling the foot brake intermittently (depress the brake intermittently several times). If necessary, lower the blade to the ground to stop the machine. PARKING MACHINE G Park the machine on level ground where there is no danger of falling rocks or landslides, or of flooding if the land is low,and lower the work equipment to the ground. G If it is necessary to park the machine on a slope, set blocks under the tracks to prevent the machine from moving, then dig the work equipment into the ground.
G After stopping the engine, operate the blade control lever several times to the RAISE and LOWER positions to release the remaining pressure in the hydraulic circuit. G When parking on public roads, provide fences, signs, flags, or lights, and put up any other necessary signs to ensure that passing traffic can see the machine clearly, and park the machine so that the machine, flags, and fences do not obstruct traffic. Parking procedure : See "PARKING MACHINE (PAGE 3-103)". G When leaving the machine, set the safety lock lever to the LOCK position, stop the engine, and use the key to lock all the equipment. Always remove the key and take it with you. Work equipment posture :
See "PARKING MACHINE (PAGE 3-103)". Locks : See "LOCKING (PAGE 3-105)". G Always close the door of the operator's compartment. 2-24