a EAaFUU;Gs f%i%iee$ follow these safety precautions may lead 6. GENERAL PRECAUTIONS -I UNAUTHORIZED MODIFICATION 1 l Any modification made without authorization from Komatsu can create hazards. l Before making a modification, consult your Komatsu distributor. Komatsu will not be responsible for any injury or damage caused by any unauthorized modification. ALWAYS APPLY LOCK WH When standing up from the operator’s seat, always place the safety lock lever securely in the LOCK position. If you accidentally touch the travel or swing lever when they are not locked, the work equipment may suddenly move and cause serious injury or damage.
When leaving the machine, lower the work equipment completely to the ground, set the safety lock lever to the LOCK position, then stop the engine and use the key to lock all the equipment. Always take the key with you. Work equipment posture + See Locks -) See “12.16 LOCKING”. “12.12 PARKING MACHINE”. MOUNTING AND DISMOUNTING NEVER jump on or off the machine. NEVER get on or off a moving machine. When getting on or off the machine, face the machine and use the handhold and steps. Never hold any control levers when getting on or off the machine.
Maintain three-point contact (both feet and one hand or one foot and both hands), and be sure that you are supported securely by the handrail and steps. If there is any oil, grease, or mud on the handholds or steps, wipe it off immediately. Always keep these parts clean. Repair any damage and tighten any loose bolts. AL187320 l-3