GENERAL PRECAUTIONS SAFETY The ROPS is a fixed component of the cab. The machine must not be operated without this roll-over protection system. The ROPS meets the regulations of all member states of the EU. If, however, the ROPS is modified, damaged, or repaired without permission, its stability is impaired. In this case, the ROPS must be replaced, since its correct function can no longer be guaranteed. The ROPS can only provide maximum protection, if the driver wears the safety belt correctly. For this reason, the safety belt is to be worn when the machine is in operation. ATTACHMENT FOR PROTECTION AGAINST FALLING OBJECTS (FOPS) 0. NOTICE FOPS is a fixed component of the cab.
When you work on a site where there is danger of falling rocks or other objects, the machines must be equipped with a FOPS. If the FOPS is modified without permission or damaged, its stability is impaired. In this case, the FOPS must be replaced, since its correct function can no longer be guaranteed. PRECAUTIONS FOR ATTACHMENTS 0. When installing optional parts or attachments, there may be problems with safety or legal restrictions, There- fore contact your Komatsu distributor for advice. Any injuries, accidents, or product failures resulting from the use of unauthorized attachments or parts will not be the responsibility of Komatsu.
When installing and using optional attachments, read the instruction manual for the attachment, and the gen- eral information related to attachments in this manual. UNAUTHORIZED MODIFICATION 0. Any modification mode without authorization from Komatsu can create hazards. Before making a modification, consult your Komatsu distributor. Komatsu will not be responsible for any injuries, accidents, or product failures resulting from modifications made without authorization from Komatsu. SAFETY AT WORKSITE 0. Before starting operations, thoroughly check the area for any unusual conditions that could be dangerous.
When carrying out operations near combustible materials such as thatched roofs, dry leaves or dry grass, there is a hazard of fire, so be careful when operating. Check the terrain and condition of the ground at the worksite, and determine the safest method of operation. Do not carry out operations at places where there is a hazard of landslides or falling rocks. If water lines, gas lines, or high-voltage electrical lines may be buried under the worksite, contact each utility and iden- tify their locations. Be careful not to sever or damage any of these lines. Take action to prevent unauthorized people from approach- ing the jobsite.
When working on public roads, position flagmen and erect barriers to ensure the safety of passing traffic and pedestri- ans. When traveling or operating in shallow water or on soft ground, check the shape and condition of the bedrock, and the depth and speed of flow of the water before starting operations. Always design and maintain the roads on the jobsite so that the machines can travel safely. 2-10