Barcode Verifiers Solutions Selection Guide (EN)

Verification Verification is an objective, precise standardized measurement of the quality of a barcode symbol against a published specification. Verification is a predictor of how well a code will be able to be read throughout its life cycle. The Verifier is the calibrated instrument used to objectively measure the barcode quality

Стр. 2

Off-line Verifiers Off line Verifiers can be used to measure barcode quality of a single barcode at a time. Usually on a label or DPM. DPM stands for Direct Part Marking where the barcode is marked onto the part or into the part. Some DPM Barcodes use depth for the marking (dot peen, percussion & some laser marks). These are a Low Contrast DPM and require the 30 degree angle lighting, specifically available on the LVS-9585.

Стр. 3

Which Verifier Should I Choose? Labels Only Label & Direct Part Marks Desktop Verifier Handheld Labels & High Contrast DPM Labels, High & Low Contrast DPM (Laser Mark, Engraving, Dot Peen) Verifier (Ink Jet, Laser Mark) LVS 9510 LVS 9580 LVS 9585 LVS 9580 9510-5-175 9510-5-3 9510-5-4 9510-5-45 9510-5-6250 9580-1D-3 9580-2D-3 9580-C-3 9580-DPM 9580-DPM-HD 9585-DPM 9585-DPM-HD *Select a part number based on the barcode type, size and field of view required. Click the picture to link to the individual product

Стр. 4

LVS-9510 Desktop Verifier LVS 9510 Desktop Barcode Verifier Web Page link Calibrated Verifier Intended for “Off-Line” label verification Labels can be set directly on top of the glass Provides a verification report for each barcode Includes Red Dome Lighting USB Powered Connection to PC Includes Omron LVS PC verification software Click on pictures to link to datasheet

Стр. 5