Safety en 1.5 Safe installation WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶ The protective conductor system of the domestic electrical in- stallation must be properly installed. ▶ Never equip the appliance with an external switching device, e.g. a timer or remote control. ▶ When the appliance is installed, the mains plug of the power cord must be freely accessible.
If free access is not possible, an all-pole isolating switch must be installed in the permanent elec- trical installation according to the installation regulations. ▶ When installing the appliance, check that the power cable is not trapped or damaged. If the insulation of the power cord is damaged, this is dangerous. ▶ Never let the power cord come into contact with heat sources. WARNING ‒ Risk of explosion! If the appliance's ventilation openings are sealed, a leak in the re- frigeration circuit may result in a flammable mixture of gas and air. ▶ Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. Portable multiple socket strips or portable power supply units may overheat and cause a fire. ▶ Do not place portable multiple socket strips or power supply units on the back of the appliance. 5