00.8 Model R 1150 R Connection 32 Steering Handlebars to fork bridge, tightening se- quence: 1. Front fastener (as viewed in forward Nm direction of travel) until seated 2.
Rear fastener (as viewed in forward Nm direction of travel) 21 21 Handlebar weight to handlebars Nm 21 Pivot screw, handlebar lever Nm 11 (Tuflok Blue thread-locking compound; screw can be released and tightened a number of times) Model R 1150 R Connection 33 Rear wheel drive Oil filler plug Nm 23 Oil drain plug Nm 23 Threaded ring Nm 160 (clean thread + Loctite 577) Hexagon nut, input bevel gear Nm 200 (clean thread + Loctite 2701) Cover to rear-wheel drive housing Nm 35 Fixed bearing stud bolt, swinging arm to Nm gearbox 160 Floating bearing stud bolt, swinging arm to gearbox 1. initial torque Nm 2. slacken 3.
final torque Nm 9 7 Locknut, floating bearing stud bolt, Nm swinging arm to gearbox 160 Fixed bearing stud bolt, Nm swinging arm to rear axle housing 160 (clean thread + Loctite 2701) Floating bearing stud bolt, swinging arm to rear axle housing 1. initial torque Nm 2. slacken 3. final torque Nm 9 7 Locknut, floating bearing stud bolt, Nm swinging arm to rear axle housing 160 (clean thread + Loctite 2701)