Installing cover for windscreen adjuster and installing windscreen Assembling case • Position the lid on the case for alignment. Open the hinges of the lid and guide them into the base with the guide hook. • From the inside, insert the pop rivets into the base and the hinges. – 2x long rivets in hinge at rear, as viewed in for- ward direction of travel. – 2x short rivets in hinge at front, as viewed in for- ward direction of travel. • Engage riveting tool on rivets, hold the hinge at the outside to keep it in position and secure all four rivets. • Oil the seal in the bottom of the case, using the sponge provided for the purpose. • Install the cover for the windscreen adjuster.
• Install windscreen with washers. • Install the aerial. Installing mirrors e Attention: Make sure that the seal is not squeezed out of shape and that the lid closes without catching. • Carefully close the case. • Insert the lock cylinder into the case with the key in the lock and turn the lock. • Affix the stickers. RT460280 • Connect the turn indicators. • Position the mirror at the 3 attachment points. • Engage by pressing at the front first, then the rear. 00.20 R22000070 R2200006 R2200006 0