00 11 209 Changing engine oil, replac- ing oil filter element • Insert and tighten the screw plug. e Attention: Never top up the engine-oil level past the “MAX” mark. (Inspections I, II, III and IV) L Note: If the motorcycle is ridden only for short distances or outside temperatures are below 0°C (32°F) change the oil and replace the oil filter element every 3 months, or not later than every 3,000 km (1,800 miles). X Tightening torque: Oil filter......................................................... 11 Nm Oil drain plug................................................ 32 Nm • Change the oil at operating temperature. Engine oil capacities: with oil filter renewal ...................
3.75 l (6.60 Imp. pints/3.96 US quarts) without oil filter renewal ................... 3.50 l (6.16 Imp. pints/3.69 US quarts) Quantity of oil between MIN and MAX marks ................... 0.50 l (0.88 Imp. pints/0.52 US quarts) Engine oil grade: Brand-name HD oil for spark-ignition engines, API classifications SF, SG, SH; combination with CD or CE specification. Brand-name HD oil of CCMC classification G4, G5; amendment PD2 is permissible. R22000080 • Remove screw plug. • Remove oil drain plug and drain off oil. 11 4 650 C000030 • Use oil filter wrench, BMW No. 11 4 650 , to re- move the oil filter. • Coat sealing ring on new oil filter element with oil and install filter.
• Reinstall the oil drain plug with a new sealing ring. • Refill with oil to correct level. BMW recommends Castrol 00.30