00 Tightening torque 00.3 Model R 1150 RT Connection 11 Engine Cylinder head Tightening sequence: 1 Tighten cylinder head nuts (oiled) in diagonally opposite sequence 1.1 Tighten all nuts to closing torque Nm 1.2 Tighten all nuts to correct wrench ° angle 1.3 Tighten all nuts to correct wrench ° angle 2 M 10 screw Nm 3 M 6 screw Nm 20 90 90 40 9 After 1,000 km (600 miles), tighten cylinder head nuts in diagonally opposite se- quence:
1 Slacken one nut 2 Tighten nut to initial torque Nm 3 Tighten nut to wrench angle ° 4 Slacken and retighten M 10 screw Nm 20 180 40 Timing gear carrier to cylinder head Nm 9 Bearing cap on rocker shaft Nm 18 Locknut, valve adjusting screw Nm 8 Cylinder head cover to cylinder head Nm 8 Camshaft end cover to cylinder head Nm 9 Air intake connection to cylinder head Nm 9 Camshaft Chain sprocket to camshaft Nm 65 Camshaft bearing cap Nm 15 Alternator mount cover M 6 screw Nm 9 M 8 screw Nm 20 Auxiliary shaft Chain sprocket to crankshaft Nm 10 Chainwheel to auxiliary shaft Nm 70 Chain tensioner housing to engine block Nm 9