Preventing material damage en 2 Preventing material 3 Environmental protec- damage tion and saving energy ATTENTION! If not rolling freely, the appliance's castors may damage the floor when the appliance is moved. ▶ Transport the appliance using a 3.1 Disposing of packaging The packaging materials are environ- mentally compatible and can be re- cycled. ▶ Sort the individual components by sack truck. ▶ Use floor protection when moving type and dispose of them separ- ately. the appliance, and do not move it in a zigzag fashion. Using the appliance, base, runners or doors as a seat or climbing surface may damage the appliance.
▶ Do not stand or lean on the appli- 3.2 Saving energy If you follow these instructions, your appliance will use less power. ance, base, runners or doors. Contamination with oil or fat may cause plastic parts and door seals to become porous. ▶ Keep plastic parts and door seals Selecting the installation location Ў Keep the appliance out of direct sunlight. Ў Install the appliance as far away as free of oil and grease. Metal or metal-style parts in the appli- ance may contain aluminium. Alu- minium reacts when it comes into contact with acidic foods. ▶ Do not store unpackaged food in possible from heating elements, cookers and other heat sources:
– Maintain a 30 mm clearance to electric or gas cookers. – Maintain a 300 mm clearance to oil or solid-fuel cookers. Ў Make sure there is a small gap the appliance. If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discol- our. ▶ Never clean fittings and accessory between the side wall and the ap- pliance. Ў Never cover or block the external ventilation openings. in the dishwasher. Saving energy during use Note: The arrangement of the fittings does not affect the energy consump- tion of the appliance. Ў Open the appliance only briefly and then close it carefully.
Ў Never cover or block the interior ventilation openings or the exterior ventilation openings. Ў Transport purchased food in a cool bag and place in the appli- ance quickly. 13