Familiarising yourself with your appliance en Over-and-under and side-by-side installation If you want to install 2 refrigerating appliances one over the other or side by side, you must maintain a clear- ance of at least 150 mm between the appliances. Selected appliances can be installed without a minimum clear- ance. Ask your dealer or kitchen planner about this. 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. → Fig. 1 → Page 20 B Freezer compartment → Page 21 4.3 Installing the appliance ▶ Install the appliance in accordance with the enclosed installation in- structions.
4.4 Preparing the appliance for the first time 1. Remove the informative material. 2. Remove the protective foil and transit bolts, e.g. remove the ad- hesive strips and carton. 3. Clean the appliance for the first age container) → Page 18 time. → Page 23 → Page 16 8 Fruit and vegetable container with humidity control → Page 16 9 Frozen food container → Page 24 4.5 Connecting the appliance to the electricity supply 1. Insert the mains plug of the appli- ance's power cable in a socket nearby. The connection data of the appli- ance can be found on the rating plate. → Fig. 1 / 6 2. Check the mains plug is inserted for large bottles → Page 17 properly. a The appliance is now ready for Note:
Deviations between your appli- ance and the diagrams may differ with regard to their features and size. use. 15 A Refrigerator compartment 1 Control panel → Page 16 2 Lighting 3 Bottle shelf → Page 16 4 Interior ventilation opening 5 Temperature controller (stor- 6 Rating plate → Page 29 7 Storage container 10 Screw foot 11 Door storage compartment