A. MAIN POWER SWITCH AND CONNECTORS 1 Power socket Use to connect machine to power supply. 2 Main power switch Use to turn on/off the main power. 3 Air vents 4 Card slot Slot for memory card insertion. 5 Foot controller jack Use to connect the foot controller. CAUTION When leaving the sewing machine unat- tended, the main switch of the machine must be switched off or the plug must be removed from the socket-outlet. When servicing the sewing machine, or when removing covers or changing bulbs, the machine or the electrical set must be unplugged. For U.S.A. only This appliance has a polarized plug (one blade wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, re- verse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. B. FLATBED ATTACHMENT WITH ACCESSORY COMPARTMENT I Slide accessory case to the left and out of the machine. II Each presser foot has a letter. 1 Presser foot letter III ACCESSORY LIST The location of each accessory is shown in fig- ure III . * Always use BROTHER accessories with this machine. 6 5 1 2 3 4 5 I II J I II J 1 III 5 6 1 7 4 2 3 No.
Part Name Part Code 1 Buttonhole foot “A” X57789-101 2 3 Overcasting foot “G” Seam ripper X51162-001 X54243-001 4 Bobbin X80309-001 5 Needle set XA6627-001 6 Spool cap (Large) 130012-053 7 Spool cap (Small) XA5752-001