For Windows NT ® Workstation Version 4.0 Users Step 1. Check that your computer is turned ON. Step 3. Turn the MFC power switch ON. Step 4. Follow the instructions on the You must be logged on as the Administrator. screen. Step 2. Connect the MFC to your PC (Same step as for Windows ® 95/98/98SE/Me/2000 Users Step 3. , 1 to 10 ) with the Parallel Cable. 11. Select Yes to restart your computer, and then click Finish . A. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. B. Connect the interface cable to the printer port of the computer and secure it with the two screws.
For the location of your computer’s parallel printer port, see the User’s Guide for your computer. 12. Click Yes to have the Control Center loaded each time Windows is started. The Control Center will appear as an icon in the task bar. If you click No , the Scan keys on the MFC will be disabled.*3 The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. For Apple ® Macintosh ® QuickDraw ® Driver for OS 8.6/9.0/9.0.4/9.1 Users Step 1. Make sure your MFC power switch Step 5. Connect the MFC to your Macintosh with the USB cable, and then turn is turned OFF and your Macintosh is turned ON.
the MFC power switch Make sure you do NOT connect your MFC to your Macintosh ON. Step 2. Insert the CD-ROM into your CD-ROM drive. Installing MFL Pro Driver 1. When the window appears, double-click MFL-PRO Suite Driver Installer to install the printer and scanner drivers. After the installation is completed, the screen prompts you to restart your Macintosh. Step 6. Select the Printer. 1. From the Apple menu, open the Chooser . 2. Click to highlight the printer driver icon you installed. On the right side of the Chooser , select the printer to which you want to print. Close the Chooser . Step 3. Restart your Macintosh so it can recognize the new driver. Step 7. Install Paper Port. Step 4.
Connect the Filter Core and 1. Double-click the PaperPort ® 5.5 Installer . *1 2. Follow the instructions on the screen. Cable Tie to the USB cable. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. What is included on the CD-ROM Windows Macintosh You can get a variety of information from this CD-ROM (For Windows®) Install Software You can install printer and scanner drivers and the various utility items. On-Line Documentation View the Owner’s Manual and other documentation. Brother Support Get all contact you need if you have to get in touch with our Customer Service, or Brother Authorized Service Center. Help Helpful hints.
You can get a variety of information from this CD-ROM (For Macintosh®) MFL Pro Driver Installer You can install the PC FAX send, printer and scanner drivers and the various utility items. PaperPort 5.5 Installer You can install a document management application used to view scanned documents. ReadMe! You can get important information and troubleshooting tips. Documents View the Owner’s Manual and other documentations.