To access the menu, press Menu/Set . To exit, press Stop/Exit . * The factory setting (option) is shown in bold. 13 Main Menu Submenu Menu Selections Options to a Descriptions ccept Page 2. FAX (Continued) 1. SETUP RECEIVE (Continued 3. F/T RING TIME ) 4. FAX DETECT 5. REMOTE CODE 6. AUTO REDUCTION 7. MEM. RECEIVE 8. POLLING RX 70 40 30 (Example for 20 Australia) Sets the time for “F/T pseudo-ring” in Fax/Tel (F/T) Mode. 27 ON OFF Receive fax messages without pressing the Mono Fax Start key. 28 ON ( 51, #51) ( 91, #91 for New Zealand) OFF Enter code to activate or deactivate your machine from a remote location. 40 ON OFF Reduces size of image.
28 ON OFF Automatically stores any incoming faxes in its memory if it runs out of paper. 29 STANDARD SECURE TIMER You call another fax machine to receive a fax from it. 45 2. SETUP SEND 1. CONTRAST 2. FAX RESOLUTION 3. TIMER 4. BATCH TX AUTO LIGHT DARK Change the lightness or darkness of a fax you are sending. 21 STANDARD FINE S.FINE PHOTO Changes the default setting of fax resolution. 21 — Set the machine to send your documents later. 34 ON OFF Sends all delayed faxes that are to the same fax number and at the same time as one transmission. 34