MEASURING RANGE The Battery Tester can perform test on batteries rated within 100-2000CCA/30Ah-220Ah. WARNINGS ● DO NOT place the tester near the engine or exhaust pipe to avoid damage by high temperatures, when the car engine is running. ● DO NOT smoke, cause sparks, or strike matches near the battery when testing. ● DO NOT remove battery clamps while testing. ● DO NOT put the tester into a highly humid, dusty environment. ● DO NOT disassemble the tester, or may cause damage. FCC Warnings: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are EN I 17 Measure Standard Measure Range CCA 100-2000 BCI 100-2000 CA 100-2000 MCA 100-2000 JIS 26A17-245H52 Measure Standard Measure Range DIN 100-1400 IEC 100-1400 EN 100-2000 SAE 100-2000 GB 30-220Ah