● The AVH function exits to the standby mode after the vehicle stops for 10 minutes, with the AVH standby indicator lighting up and gear shifted into Park. ● To activate AVH funtion, shifting into Drive to enable the vehicle to move, and then press the brake pedal until the vehicle stops (vehicle speed goes to zero). AVH activated AVH exits ● When the AVH standby indicator is solid on, press the brake pedal until the vehicle stops (vehicle speed goes to zero) to avtivate AVH function. At this time, the vehicle is in AVH state with ● When the AVH funtion runs normally, AVH exits and the the gear is shifted into Park form Drive automatically when the driver performs the followings:
displayed on the instrument cluster. ● Open the driver's door. ● Unlock the driver's seat belt. CAUTION ● The gear status is in Drive when the vehicle stops, and EPB is enabled. ● For AVH to be activated, all of the follow conditions must be met: ● Press the AVH switch again to disable AVH when releasing the brake pedal. ● The driver's seat belt is fastened and the doors are closed. AVH suppressed ● Intelligent power braking system and electronic park brake (EPB) systems are normal. ● Shifting into Reverse, AVH goes into slow-moving condition.
When the vehicle is reversing (R gear) or traveling (shift into D gear from R gear) at a low speed, AVH cannot be suppressed and stays in standby status to improve vehicle motion. ● Pressing the accelerator pedal, shifting into Park, powering off the vehicle, or engaging the EPB manually can make AVH exit to the standby status. ● To exit slow-moving mode, push the AVH switch or drive at a speed above 10 km/h. The AVH function is standby and can be activated normally. ● AVH has a memory function, which will keep the state of the last power off when it is powered on again.
AVH running Driving Precautions ● The AVH runs normally when it is activated, brake lights and the high- mount brake light are on, and the AVH indicator ● Slow down when driving against strong winds. ● Drive slowly and keep the correct direction on gravel roads. To prevent tire damage, do not drive over sharp- is solid on on the instrument cluster. 112