BYD Seal — Locking/Unlocking the Trunk

Unlocking the trunk with microswitch ● With the vehicle locked, press the rear microswitch while carrying a valid key to unlock the trunk. ● With the vehicle unlocked, press the rear microswitch to open the trunk. ② Vehicle lock button* ● When the ignition is off, pressing the lock switch while carrying a valid smart key closes the trunk, locks the entire vehicle, and arms the anti-theft alarm system. Opening the trunk from inside REMINDER With the vehicle unlocked, pull up the electrical trunk lid button to open the lid. ● Before closing the electronically, make sure doors, windows are properly closed to avoid property loss.

● If the vehicle speed is greater than 3 km/h, the trunk lid cannot be opened by pulling up the button. Setting trunk opening height* ● Open the trunk manually or automatically to the desired position, keep it at this position, and then press and hold the interior trunk button for over three seconds. The speaker sounds for one second, indicating that the opening height is set to the current position. ● Set the trunk opening height by going to the infotainment touchscreen → ① Trunk lid close button* → Vehicle → Locks . ● When the trunk lid is open and stationary, press the trunk close button to close this lid.

Anti-pinch function If the trunk receives a hindering force while it is closing, it will automatically switch to the opposite direction. If it receives a hindering force while it is opening, it will halt. ● Press this button a second time to stop the lid at the current position. Press this button again to have the lid move in the opposite direction. When the trunk fails to act automatically 54