service life and influence your driving experience. ● Switch the ignition off before charging. ● Precautions: ● Mode 2 charging means charging with an AC charging connector. It is recommended to use the dedicated AC lines and power sockets meeting local standards to avoid line damage and protective trip due to high-power charging, then affecting the normal use of other equipment. ● The vehicle can be powered on to use the A/C while charging. To ensure the charging power, it is recommended to turn off the A/C. ● The vehicle should be parked in a ventilated area, and there should not be any occupant inside when charging.
● Avoiding damage to the charging equipment (precautions for charging equipment): ● The vehicle system automatically stops charging when the high-voltage battery is fully charged. ● Prevent the charging equipment from suffering any mechanical impact such as fall and collide. ● To stop AC or DC charging, turn off the charger before disconnecting the charging connector. In Mode 2 charging, remove the charging connector and then the power plug. 04 ● Do not place the charging equipment near heaters or other heat sources. USING AND DRIVING ● Never drop the equipment or move it by pulling it directly by the cable. Take caution when moving and using the equipment.
● When charging is complete and the charging connector is unplugged, make sure that the charge port's cap and door are closed, otherwise water or foreign materials may enter the port and affect its normal use. ● Inserting the charging connector before charging: ● During DC charging, the DC charging power is relatively small during the identification period to identify the real capability of the charging pile and allow the charging pile to exert its maximum output capacity, thereby bringing users a better charging experience. (only for motor booster DC Charge).
● Make sure that the charging connector and charge port are free of foreign objects, and that the protective cap of the charging connector terminal does not get loose or deformed. ● Hold the charging connector, align the connector with the charge port and push it in, making sure that they are properly connected. ● Before starting the vehicle, ensure that the charging equipment is disconnected. The locking mechanism can damage the charging equipment and the vehicle if the vehicle is started with the charging connector incorrectly inserted. ● Removing the charging connector at the end of charging: ● Stop charging first and make sure the charge port is unlocked. ● Pull the charging connector.
● When the temperature is low, it is recommended to charge the vehicle in heated space indoors. ● Do not force the charging connector out while the charge port is locked, otherwise the charge port may be damaged. 81